<xmp id="ya4su"><optgroup id="ya4su"></optgroup>
  • <xmp id="ya4su">
  • <xmp id="ya4su">

    AJ-1000 Flow Injection Analyzer


    The instrument is designed for the determination of cyanide, volatile phenol, anionic surfactant, ammonia nitrogen, chemical oxygen demand, sulfide, total phosphorus, total nitrogen, nitrate / nitrite, hexavalent chromium and other ingredients in surface water, groundwater, drinking water and environmental water.


    -Fully automatic multi-channel analysis, the workstation software can run up to 8 channels simultaneously. The analysis method is easy and fast to change; the entire analysis process is completed automatically without manual operations;
    -Peristaltic pump: 12-channel integral gland peristaltic pump, pump speed can be programmed between 1-100 rpm;
    -Auto sampling system: polar-coordinate auto sampling system, with 162 positions for sample tube, cell for needle washing and 2 large cells for cleansing liquid, to meet the needs of large sample volume analysis;
    -Super long life-time LED light source up to tens of thousands of hours. High-sensitivity blue-light enhanced photo detector, and the wavelength range is 340nm-1050nm;
    -High-precision A/D converter, the detection dynamic range is not less than 3 orders;
    -Diluter: It can automatically make standard solutions for calibration curve and online dilution of out-of-range samples with a dilution factor of 1.5-10000 times;
    -Reagent dosage: 10ug-100ug depending on the method;
    -Response Time: each method is different, the fastest is 120 samples / hour.


    Linear range: 0.01 -2mg / L (based on P);
    MDL: <0.005 mg / L (based on P);
    Response Time: 30 samples / hour;
    Precision: <1.0%;
    Note: the specifications will vary on the measured substances.

    Follow us on Wechat

    • Headquarter Shanghai
    • Tel:400-832-8801;021-56606703
    • Fax:021-36212790
    • Email:15910613219@anjie.net.cn
    • Contact:Mr. Liu